на главную  карта сайта  e-mail
technology, manufacturing,
paper honeycomb products

Products → Paper honeycomb

Paper Honeycomb

One of the products we manufacture is Paper Honeycomb. Modern technological equipment allows us to manufacture the top quality Paper Honeycomb with variety of geometrical and physical parameters. We can produce Paper Honeycomb with 6-sided core, up to 1600mm in width. This allows us to produce 3-layer honeycomb panels that are described in a corresponding section.

An automatic production line ensures manufacturing of Paper Honeycomb with infinite length and following characteristics:

  • height(H) – 10 to 100mm;
    width(in unexpanded condition) – up to 1600mm;
  • width in expanded condition(W) – up to 1280mm;
  • length (L) – infinite;
  • cell size(diameter of a circle inscribed in a hexagon) -14, 21 and 27mm;
  • compressive strength – 1,4 – 5,5 kg/cm2.

As a raw material for Paper Honeycomb production we use fluting with density 120-200gsm.

How to Use Paper Honeycomb

It is well-known that Paper Honeycomb has got several alternative materials. Paper Honeycomb is not going to supplant all traditional materials that are now used in furniture manufacturing. However, there are several directions, where it is almost impossible to compete with paper honeycomb.

Firstly, it is manufacturing furniture elements of large height. In this case economical and physical characteristics match each other very well. When increasing the height of paper honeycomb, the level of strength of the furniture panel grows but the weight increases insufficiently. For example, a furniture panel 2000x800x50 weighs only around 2 kg. The weight of the same size panel made of particleboard weighs around 58 kg. It results in cutting costs on transportation and also you are not limited by standard dimensions of particleboard and can vary the sizes of paper honeycomb.

Secondly, it is an opportunity to produce curvilinear furniture surfaces. You will not have any additional waste nor additional mechanical treatment when producing such items. In order to produce such constructions manufacturers usually over expand Paper Honeycomb in order to change the shape of a cell to tetragonal. Gluing of curvilinear furniture may be done in vacuum presses.

Thirdly, it is manufacturing of flat furniture panels. The production of such items does not require additional mechanical treatment.

Paper Honeycomb is one of the most economically reasonable materials. High strength and low weight, low cost, eco-friendliness, high heat and noise insulation, ability to sustain impacts – these are the factors that determine the wide variety of appliances for Paper Honeycomb that is only limited by your imagination.

+371 2546 5238
Copyright © 2013 "HONEYCOMB TEHNOLOGIES LATVIA". All Rights Reserved. Developed by MUSOYAN brothers studio. MUSOYAN brothers studio